Preconditioning and triggering of offshore slope failures and turbidity currents revealed by most detailed monitoring yet at a fjord-head delta

Rivers and turbidity currents are the two most important sediment transport processes by volume on Earth. Various hypotheses have been proposed for triggering of turbidity currents offshore from river mouths, including direct plunging of river discharge, delta mouth bar flushing or slope failure caused by low tides and gas expansion, earthquakes and rapid sedimentation. During 2011, 106 turbidity currents were monitored at Squamish Delta, British Columbia. This enables statistical analysis of timing, frequency and triggers. The largest peaks in river discharge did not create hyperpycnal flows. Instead, delayed delta-lip failures occurred 8–11 h after flood peaks, due to cumulative delta top sedimentation and tidally-induced pore pressure changes. Elevated river discharge is thus a significant control on the timing and rate of turbidity currents but not directly due to plunging river water. Elevated river discharge and focusing of river discharge at low tides cause increased sediment transport across the delta-lip, which is the most significant of all controls on flow timing in this setting

Mud-clast armoring and its implications for turbidite systems

Seafloor sediment density flows are the primary mechanism for transporting sediment to the deep sea. These flows are important because they pose a hazard to seafloor infrastructure and deposit the largest sediment accumulations on Earth. The cohesive sediment content of a flow (i.e., clay) is an important control on its rheological state (e.g., turbulent or laminar); however, how clay becomes incorporated into a flow is poorly understood. One mechanism is by the abrasion of (clay-rich) mud clasts. Such clasts are common in deep-water deposits, often thought to have traveled over large (more than tens of kilometers) distances. These long travel distances are at odds with previous experimental work that suggests that mud clasts should disintegrate rapidly through abrasion. To address this apparent contradiction, we conduct laboratory experiments using a counter rotating annular flume to simulate clast transport in sediment density flows. We find that as clay clasts roll along a sandy floor, surficial armoring develops and reduces clast abrasion and thus enhances travel distance. For the first time we show armoring to be a process of renewal and replenishment, rather than forming a permanent layer. As armoring reduces the rate of clast abrasion, it delays the release of clay into the parent flow, which can therefore delay flow transformation from turbidity current to debris flow. We conclude that armored mud clasts can form only within a sandy turbidity current; hence where armored clasts are found in debrite deposits, the parent flow must have undergone flow transformation farther up slope

Morphodynamics and depositional signature of low-aggradation cyclic steps: New insights from a depth-resolved numerical model

Bedforms related to Froude-supercritical flow, such as cyclic steps, are increasingly frequently observed in contemporary fluvial and marine sedimentary systems. However, the number of observations of sedimentary structures formed by supercritical flow bedforms remains limited. The low number of observations might be caused by poor constrains on criteria to recognise these associated deposits. This study provides a detailed quantification on the mechanics of a fluvial cyclic step system, and their depositional signature. A computational fluid-dynamics model is employed to acquire a depth-resolved image of a cyclic step system. New insights into the mechanics of cyclic steps shows that: (i) the hydraulic jump is, in itself, erosional; (ii) there are periods over which the flow is supercritical throughout and there is no hydraulic jump, which plays a significant role in the morphodynamic behaviour of cyclic steps; and (iii) that the depositional signature of cyclic steps varies with rate of aggradation. Previous work has shown that strongly aggradational cyclic steps, where most of the deposited sediment is not reworked, create packages of backsets, bound upstream and downstream by erosive surfaces. Here the modelling work is focussed on less aggradational conditions and more transportational systems. The depositional signature in such systems is dominated by an amalgamation of concave-up erosional surfaces and low-angle foresets and backsets creating lenticular bodies. The difference between highly aggradational cyclic steps and low aggradation steps can be visible in outcrop both by the amount of erosional surfaces, as well as the ratio of foreset to backset, with backsets being indicative of more aggradation

Controls on upstream-migrating bed forms in sandy submarine channels

Submarine channels parallel river channels in their ability to transport sediment. However, in contrast to rivers, sediment transport and bed-form development in submarine channels are less well understood. Many steep (>1°), sandy submarine channels are dominated by upstream-migrating bed forms. The flow conditions required to form these upstream-migrating bed forms remain debated because the interactions between turbidity currents and active bed forms are difficult to measure directly. Consequently, we used a depth-resolved numerical model to test the role of flow parameters that are hypothesized to control the formation of upstream-migrating bed forms in submarine channels. While our modeling results confirmed the importance of previously identified flow parameters (e.g., densiometric Froude number), we found that basal sediment concentration in turbidity currents is the strongest predictor of upstream-migrating bed-form formation. Our model shows how locally steep gradients enable high sediment concentrations (average >5 vol%) in the basal parts of flows, which allow the development of cyclic step instabilities and their associated bed forms. This new insight explains the previously puzzling observation that upstream-migrating bed forms are abundant in proximal, steep, sandy reaches of submarine channels, while their occurrence becomes more intermittent downslope

Author Correction: Rapidly-migrating and internally-generated knickpoints can control submarine channel evolution (Nature Communications, (2020), 11, 1, (3129), 10.1038/s41467-020-16861-x)

© 2020, The Author(s). The original version of this Article contained an error in the labelling of the cross-section in Fig. 2g and the vertical axis in Fig. 2b. This has been corrected in both the PDF and HTML versions of the Article

History of Anvers-Hugo Trough, western Antarctic Peninsula shelf, since the Last Glacial Maximum. Part I: Deglacial history based on new sedimentological and chronological data

Reconstructing the advance and retreat of past ice sheets provides important long-term context for recent change(s) and enables us to better understand ice sheet responses to forcing mechanisms and external boundary conditions that regulate grounding line retreat. This study applies various radiocarbon dating techniques, guided by a detailed sedimentological analyses, to reconstruct the glacial history of Anvers-Hugo Trough (AHT), one of the largest bathymetric troughs on the western Antarctic Peninsula (WAP) shelf. Existing records from AHT indicate that the expanded Antarctic Peninsula Ice Sheet (APIS) advanced to, or close to, the continental shelf edge during the Last Glacial Maximum (LGM; 23-19 cal kyr BP [ = calibrated kiloyears before present]), with deglaciation of the outer shelf after ∼16.3 cal kyr BP. Our new chronological data show that the APIS had retreated to the middle shelf by ∼15.7 cal kyr BP. Over this 600-year interval, two large grounding-zone wedges (GZW) were deposited across the middle (GZW2) and inner shelf (GZW3), suggesting that their formation occurred on centennial rather than millennial timescales. Expanded sequences of sub-ice shelf sediments occur seaward of the inner GZW3, which suggests that the grounding line remained stationary for a prolonged period over the middle shelf. Grounding-line retreat rates indicate faster retreat across the outer to middle shelf compared to retreat across the middle to inner shelf. We suggest that variable retreat rates relate to the broad-scale morphology of the trough, which is characterised by a relatively smooth, retrograde seabed on the outer to middle shelf and rugged morphology with a locally landward shallowing bed and deep basin on the inner shelf. A slowdown in retreat rate could also have been promoted by convergent ice flow over the inner shelf and the availability of pinning points associated with bathymetric highs around Anvers Island and Hugo Island

Anvers-Hugo Trough palaeo-ice stream, Antarctic Peninsula: geomorphological evidence for the role of subglacial water in facilitating ice stream flow

We will present new multibeam bathymetry data that make the Anvers-Hugo Trough west of the Antarctic Peninsula one of the most completely surveyed palaeo-ice stream pathways in Antarctica. We interpret landforms revealed by these data as indicating that subglacial water availability played an important role in facilitating ice stream flow in the trough during late Quaternary glacial periods. Specifically, we observe a set of northward-shoaling valleys that are eroded into the upstream edge of a sedimentary basin, extend northwards from a zone containing landforms typical of erosion by subglacial water flow, and coincide spatially with the onset of mega-scale glacial lineations. Water was likely supplied to the ice stream bed episodically as a result of outbursts from a subglacial lake previously hypothesized to have been located in the Palmer Deep basin on the inner continental shelf. In a palaeo-ice stream confluence area, close juxtaposition of mega-scale glacial lineations with landforms that are characteristic of slow, dry-based ice flow, suggests that water availability was also an important control on the lateral extent of these palaeo-ice streams. These interpretations are consistent with the hypothesis that subglacial lakes or areas of elevated geothermal heat flux play a critical role in the onset of many large ice streams. The interpretations also have implications for the dynamic behaviour of the Anvers-Hugo Trough palaeo-ice stream and, potentially, of several other Antarctic palaeo-ice streams. Keywords: multibeam bathymetry, ice stream, subglacial water, landfor

Global monitoring data shows grain size controls turbidity current structure

The first detailed measurements from active turbidity currents have been made in the last few years, at multiple sites worldwide. These data allow us to investigate the factors that control the structure of these flows. By analyzing the temporal evolution of the maximum velocity of turbidity currents at different sites, we aim to understand whether there are distinct types of flow, or if a continuum exists between end-members; and to investigate the physical controls on the different types of observed flow. Our results show that the evolution of the maximum velocity of turbidity currents falls between two end-members. Either the events show a rapid peak in velocity followed by an exponential decay or, flows continue at a plateau-like, near constant velocity. Our analysis suggests that rather than triggers or system input type, flow structure is primarily governed by the grain size of the sediment available for incorporation into the flow

Supercritical and subcritical turbidity currents and their deposits-A synthesis

Common facies models of turbidite deposits are based on idealized sequences of turbidite units, which are assumed to reflect the depositional processes of a decelerating turbidity current. We show how suites of turbidite units, i.e., distinct turbidite facies associations that are easily described from core and outcrop, may characterize the entire range of large-scale dynamics of turbidity currents, enabling estimates of their densimetric Froude number (Fr; subcritical versus supercritical) and suspension fall-out rate (stratified versus nonstratified flows). The linking of facies associations with large-scale flow dynamics resolves process-facies links that were hitherto unresolved by the common turbidite facies models

Turbidity Current Bedforms

Turbidity currents in the submarine seascape are what river flows are in terrestrial landscapes. While rivers transport sediment from the mountains through valleys towards the sea, turbidity currents transport sediment from the shallow marine realms through canyons towards the deeper abyssal plains. The large scale architecture of both systems is remarkably similar. Yet, there are some fundamental differences between rivers and turbidity currents, the most fundamental one being their density difference; the density of river water is thousand times denser than its surrounding air, while the density of a turbidity current can never be more than twice as dense as its ambient water. In addition, rivers do not depend on their sediment load to flow, while turbidity (density) currents do need the sediment derived excess density to flow. These physical differences change their morphodynamics on the bedform scale. Present day high-resolution seafloor observations show that turbidity current path ways are covered with bedforms that are fundamentally different from those that occur in river channels. In this chapter we point out these differences and present a 3D bedform stability diagram for turbidites